TORIC 4.5-30×56 MRAD ELR : Slipping Your Dial and Installing the Zero Stop

TORIC 4.5-30×56 MRAD ELR: Slipping Your Dial and Installing the Zero Stop

When it comes to long-range shooting, precision isn’t just a luxury—it’s a necessity. That’s why the turret system on the TORIC 4.5-30×56 MRAD ELR Series is quickly becoming a favorite among serious shooters. Bob Ramio of Shooters Gauntlet recently walked through just how easy and reliable this system is, especially when it comes to slipping your dial and installing the zero stop.

Let’s break it down step by step so you can replicate it with confidence.

Step-by-Step: Resetting Your Elevation Turret to Zero (“Slipping the Dial”)

After zeroing your rifle, you’ll want your turret to reflect that zero position for easy reference. Here’s how to “slip the dial” on the TORIC ELR Series:

1. Record Your Zero
   • Before making any adjustments, take a photo or write down your current elevation setting. This protects you from accidental shifts.
2. Loosen the Turret Screw
   • Use the provided tool to remove the top screw on the elevation turret. The TORIC turret won’t rotate during this process, so your zero remains intact.
3. Lift and Rotate the Turret Cap
   • Gently lift the turret cap off the scope. Rotate it until the “0” aligns with your current elevation setting (e.g., 4.5 mils).
4. Reinstall the Turret Cap
   • Slide the turret cap back down so the “0” lines up with the index mark on the scope body.
5. Tighten the Screw
   • Secure the turret screw. Thanks to the design, the turret won’t shift during tightening—your zero stays locked.

Step-by-Step: Installing the Zero Stop: TORIC 4.5-30×56 MRAD ELR

The zero stop is a mechanical limiter that prevents you from dialing below your 100-yard zero. It’s a game-changer for long-range shooters who need to return to zero quickly and confidently.

1. Locate the Zero Stop Ring
   • TRACT includes a zero stop ring with the scope. You don’t have to use it, but it’s highly recommended.
2. Position the Ring
   • Drop the ring into place beneath the turret. Make sure the set screws are clear of the rotating turret components.
3. Turn Clockwise Until It Stops
   • Rotate the ring clockwise until it hits a hard stop. This sets the mechanical zero.
4. Snug the Set Screws
   • Use an Allen key to gently snug the three set screws. Don’t overtighten—just enough to hold the ring in place.
5. Reinstall the Turret Cap
   • Align the “0” with your index mark and slide the turret cap back down. Tighten the top screw securely.

Why the Zero Stop Matters for Long-Range Shooters: TORIC 4.5-30×56 MRAD ELR

Installing a zero stop isn’t just a convenience—it’s a safeguard:

• Prevents Over-Dialing: You’ll never accidentally dial below your zero, which can throw off your entire shot sequence.
• Speeds Up Corrections: Quickly return to your baseline zero without counting clicks or second-guessing.
• Boosts Confidence: In high-pressure scenarios, knowing your zero is locked in lets you focus on wind, distance, and trigger control.

Why PRS and ELR Shooters Choose the TORIC UHD 4.5-30×56 MRAD ELR

Precision Rifle Series (PRS) and Extreme Long Range (ELR) shooting demand optics that can perform under pressure, adapt to changing conditions, and deliver repeatable accuracy. The TORIC 4.5-30×56 MRAD ELR scope by TRACT has earned its place as a go-to solution for elite shooters across the country—and here’s why.

Engineered for Precision: TORIC 4.5-30×56 MRAD ELR

• First Focal Plane (FFP) Reticle
  The MRAD ELR reticle maintains consistent subtensions across all magnification levels, allowing shooters to range, hold, and correct with confidence at any zoom setting.
• 30 MIL Elevation Travel
  With a generous 30 MILs of elevation adjustment, the TORIC 34mm is built for serious long-range work. Whether you’re dialing for 1,000 yards or pushing past a mile, this scope has the headroom to get you there.
• Multi-Rotation Zero Stop
  TRACT’s zero stop system ensures you can return to your 100-yard zero without overshooting or second-guessing. It’s intuitive, tool-free, and rock-solid.

Trusted by Competitors and Long Range Instructors

Shooters like Bob Ramio of Shooters Gauntlet praise the TORIC ELR Series for its ease of use and reliability. From slipping the dial to installing the zero stop, the system is intuitive and repeatable—perfect for training new shooters and competing at the highest level.

Final Thoughts

Bob Ramio summed it up perfectly: the TORIC turret system is “simple, easy, reliable.” Whether you’re dialing for elevation at 1,000 yards or teaching new shooters how to zero their rifles, this system makes it intuitive and foolproof.

So next time you’re setting up your ELR rig, take a few minutes to slip your dial and install that zero stop. Your future self—standing behind the rifle on a windy ridge—will thank you.