Search
Account
CartUpload Gun Profiles from the Eagle Ballistics App to the TORIC 10×42 Eagle Ballistics LRF Binocular
Syncing your gun profiles from the Eagle Ballistics app to the TORIC 10×42 Eagle Ballistics LRF Binocular is fast, intuitive, and designed for hunters and shooters who want accurate ballistic solutions at the press of a button.
Below is a complete walkthrough—based directly on James Eagleman’s demonstration—showing exactly how to connect your binocular, select your profiles, and sync them successfully.
Step‑by‑Step:
1 – Build Your Gun Profiles in the Eagle Ballistics App
Before syncing, your gun profiles must be created and saved inside the app.
- Open the Eagle Ballistics App
- Go to Settings → Gun Profiles
- Create or edit the profiles you want to use
- Save each profile before moving on
The binocular must be awake and broadcasting Bluetooth for the app to detect it.
- Press the Fire button once to wake the unit
- Ensure the binocular stays awake during the entire sync process
This is where you will connect the binocular and manage synced profiles.
- In the Eagle Ballistics app, tap Devices
- Wait for the app to search for nearby hardware
- You should see TRACT TORIC 10×42 appear
Once the binocular appears, you can establish the Bluetooth link.
- Tap TRACT TORIC 10×42
- Wait a few seconds while the app checks sensors and confirms connection
- Once connected, the device status will populate
The binocular can store up to five gun profiles at a time.
- Tap Select inside the Devices screen
- Choose up to five gun profiles (e.g., Spence 143, AR10 Apollo, etc.)
- Uncheck any profiles you don’t want included
- If you select more than five, the app will warn you
This sends the selected profiles directly into the binocular’s onboard ballistic engine.
- Tap Sync in the upper‑right corner
- If you see Too Many Profiles, remove one and try again
- When successful, the app will display: “5 gun profiles added”
You can confirm the sync by checking the gun profile menu inside the binocular.
- Press and hold the Mode button to open the menu
- Scroll to Gun Profile
- Confirm that all synced profiles appear in the list
- If the app shows “Disconnected,” simply wake the binocular again and reconnect
Ready to upgrade your optics setup?
Phone: 631-662-7354 | Email: [email protected] | Live Chat Available
See what shooters are saying on Trustpilot:
How many gun profiles can the binocular store?
The TORIC 10×42 LRF can store up to five gun profiles at a time. The Eagle Ballistics app can hold unlimited profiles, but only five can be synced to the binocular simultaneously.
Why does the app say “Too Many Profiles”?
This appears when more than five profiles are selected. Simply uncheck one profile and tap Sync again.
What does it mean if the app says “Disconnected”?
It usually means the binocular went into sleep mode. Press the Fire button to wake it, then reconnect in the Devices menu.
Do I need a subscription to upload gun profiles?
No. The ballistic engine is built into the binocular. You only need the app to create profiles and sync them. A subscription is only required for advanced PRS features.
Do I need cell service or Wi‑Fi to use the binocular after syncing?
No. Once your profiles are synced, the binocular operates completely offline.
Can I change profiles later?
Absolutely. You can re‑sync, replace, or reorder profiles at any time through the app.
