TORIC 30mm, Video

TORIC 30mm 1-8X24 LPVO cover installation

Posted by Jon Allen on

Whether you’re mounting your first optic or you’re a seasoned shooter looking to protect your investment, installing Tenebrex flip-up scope covers on your TORIC 1-8×24 LPVO is one of the smartest upgrades you can make. These aren’t just any scope covers—they’re tactical-grade protection that locks in place and won’t flap during recoil like cheaper alternatives.

Let’s break down everything you need to know about installing these covers properly and getting the most out of this essential accessory.

Tools You’ll Need for Installation

Before we dive into the installation process, here’s what you’ll need to have on hand:

  • T15 Torx driver – This is the only tool required for the installation
  • Clean workspace – A stable surface to work on your riflescope
  • Microfiber cloth – To clean the scope surfaces before installation (optional but recommended)

That’s it. The beauty of the Tenebrex system is its simplicity—no complicated mounting hardware or multiple tools required. The covers are designed to fit your TORIC 1-8×24’s 30mm tube diameter perfectly.

Step-by-Step Installation Guide

Here’s the complete installation process, broken down into easy-to-follow steps:

Installing the Objective Cover

Start with the front objective cover, which protects your valuable SCHOTT HT glass from debris, moisture, and impact damage:

  1. Position the cover – Take the objective cover and slide it directly onto the objective end of your scope. Notice how it fits snugly right out of the box—this precision fit is what sets Tenebrex apart.
  2. Secure with screw – Using your T15 Torx driver, tighten the mounting screw. Here’s a crucial point: since the cover already fits snugly, you don’t need to over-tighten. Just snug it down until it’s secure.
  3. Test the flip mechanism – Your cover should now flip up smoothly and lock back in the open position. This locking feature prevents the annoying flapping that cheaper covers suffer from during recoil.

Installing the Eyepiece Cover

The rear eyepiece cover follows the same straightforward process:

PERFORMANCE-GRADE OPTICS
PERFORMANCE-GRADE OPTICS
  1. Slide onto eyepiece – Push the eyepiece cover all the way onto the rear of your scope until it’s fully seated.
  2. Tighten the screw – Again, use your T15 Torx driver to secure the mounting screw. Remember: snug, not over-tight.
  3. Verify operation – Test that the cover flips up and locks back properly.

PRO TIP: One of the coolest features of these covers is their adjustability. You can position them anywhere around the scope’s circumference—top, side, bottom—wherever works best for your shooting style and rifle setup. This is particularly useful if you’re running a scope with an offset red dot or other accessories.

Troubleshooting Common Installation Issues

While installation is typically straightforward, here are solutions to potential issues:

Cover Won’t Stay Closed

If your cover won’t stay in the closed position, check that you’ve fully seated it on the scope tube before tightening the screw. A partially installed cover won’t have the proper tension.

Difficult to Flip Open

If the cover feels too tight to operate smoothly, you may have over-tightened the mounting screw. Back it off slightly until the cover operates with appropriate resistance—secure but not binding.

Cover Positioning

Remember that you can rotate the covers to any position around the scope tube. If the cover interferes with your shooting position or other accessories, simply loosen the screw slightly, rotate to your preferred position, and re-tighten.

Scope Compatibility

These covers are specifically designed for the TORIC 1-8×24 with its 30mm tube diameter. Using them on scopes with different tube diameters or objective sizes may result in poor fit and function.

Real-World Benefits and Applications

When you’re in the field, these covers prove their worth in multiple scenarios:

Hunting Applications: Whether you’re stalking through thick brush or sitting in a ground blind, debris and moisture are constant threats to your optic’s performance. The flip-up design means you can keep your lenses protected until the moment of truth, then quickly flip them open when game appears.

Tactical Use: The locking mechanism becomes crucial during dynamic shooting situations. Unlike cheaper covers that flap during rapid fire or movement, these stay locked back and out of your way. The ability to position them anywhere around the scope means they won’t interfere with your cheek weld or hat brim.

Range Sessions: Even at the range, these covers protect against ejected brass, dirt kicked up by other shooters, and general range debris that can accumulate on your lenses.

That’s because your TORIC’s SCHOTT HT glass deserves protection that matches its quality. These covers provide that protection without compromising quick target acquisition when it matters most.

Final Thought

Installing Tenebrex flip-up covers on your TORIC 1-8×24 LPVO is a simple upgrade that delivers outsized benefits. The combination of precision fit, locking mechanism, and adjustable positioning makes these covers a worthwhile investment for any serious shooter. Take the five minutes to install them properly, and you’ll have peace of mind knowing your premium optic is protected in any environment.

Let’s make every shot count.

Frequently Asked Questions

What tools do I need to install Tenebrex covers on my TORIC 1-8×24?

You only need a T15 Torx driver to install the covers. The precision-fit design means no complicated mounting hardware is required.

Can I position the flip-up covers anywhere on my scope?

Yes, one of the key features of Tenebrex covers is their adjustability. You can rotate them to any position around the scope tube—top, side, or bottom—to avoid interference with your shooting position or other accessories.

Why do these covers lock back when opened?

The locking mechanism prevents the covers from flapping during recoil, which can be distracting and annoying, especially if they hit your hat brim. This makes them superior to cheaper alternatives that don’t lock in place.

How tight should I make the mounting screws?

The covers fit snugly by design, so you don’t need to over-tighten the screws. Just tighten them until they’re secure—over-tightening can make the flip mechanism too stiff to operate smoothly.

Are these covers compatible with other scope models?

These specific covers are designed for the TORIC 1-8×24 with its 30mm tube diameter. Using them on scopes with different specifications may result in poor fit and function.

{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “What tools do I need to install Tenebrex covers on my TORIC 1-8×24?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “You only need a T15 Torx driver to install the covers. The precision-fit design means no complicated mounting hardware is required.” } }, { “@type”: “Question”, “name”: “Can I position the flip-up covers anywhere on my scope?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes, one of the key features of Tenebrex covers is their adjustability. You can rotate them to any position around the scope tubeu2014top, side, or bottomu2014to avoid interference with your shooting position or other accessories.” } }, { “@type”: “Question”, “name”: “Why do these covers lock back when opened?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “The locking mechanism prevents the covers from flapping during recoil, which can be distracting and annoying, especially if they hit your hat brim. This makes them superior to cheaper alternatives that don’t lock in place.” } }, { “@type”: “Question”, “name”: “How tight should I make the mounting screws?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “The covers fit snugly by design, so you don’t need to over-tighten the screws. Just tighten them until they’re secureu2014over-tightening can make the flip mechanism too stiff to operate smoothly.” } }, { “@type”: “Question”, “name”: “Are these covers compatible with other scope models?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “These specific covers are designed for the TORIC 1-8×24 with its 30mm tube diameter. Using them on scopes with different specifications may result in poor fit and function.” } } ]}

Let’s make every shot count.

Have questions? We’re here to help:

⭐ See what our customers say on Trustpilot